Pipe Hook Target Hanger
$ 9.00 - $ 23.00$ 0.00
Orders under $99 = $12.50 Flat Rate Shipping
- CNC Laser cut SR500+ steel construction.
- Barbed hook keeps your target secure without dampening its ring like chain, belt or springs.
- Thicker construction than the comepetitions keep your hooks from bending.
- Optional locking bolt (included) keeps your targets in place guaranteed!
- Slides onto 3/4" EMT Conduit or Black Pipe (note that the diameter of 3/4" black pipe is just over 1").
- Hook is made to work with my round cornered carriage bolt holes. It may work with other manufacturers square mounting holes but I can't promise that. They will not work with round holes.
When it comes to hanging gongs these hooks are second to NONE! Superior ring, target retention and ease of use make this hands down the best way to hang your targets for maximum ring and movement!
C
Everything that I have purchased from Atlas has far exceeded my expectations!
Atlas sent bolts to secure targets on hangers that I didn't use and no matter how hard I tried, couldn't knock the targets off the hangers, great design.
Fit and finish has been awesome! Hangers work much better and quicker than trying to hang targets from wire.
g
Brad at Atlas Targets always gives great products and services. Of the sesveral times I have bought targets and hangers hooks from them they have always been the best you can get and the best prices. Latest have been both the 6" and 12" target hanger hooks. Really like the new upgrade them made best you can find, not thin and weak, but strong and smooth. In my opinion you can not go wrong buying from Brad and Atlas Target Works
f
I made a plate rack with the leg brackets and J hooks, and 5 inch round targets. My local club features a plate rack at out matches.
j
So I replaced my old pipe hooks with Brads new design. I liked the old except had trouble with the small light targets. Either sticking in the upright position or just falling off. My only problem with this new design is using the bolt and lock nut. While using the bolt and lock nut should not be an issue for a semi permanent target stand placement. For me setting up and taking down target stands while people wait for me on the range is an issue. My solution was a 3/4 in. clevis and cotter pin. Set up and take down is much faster and easier. Beyond that, the new design works great and I no longer have issues with those small targets. Brad has always had great customer service, Lightning speed shipping and constant design innovation. Anything you buy from Atlas target works, you should be very! happy.
S
I was hanging my 16" AR500 ½” gong target with chains from a cross beam between 2 trees. Setup was working ok but had to replace one of the chains. It was a pain to redo the setup. I wanted a larger second target for iron sights so I contacted Brad (I've bought a few other targets from him) and told him about my set up. I sent him pics of what I had and he suggested the better way to hang both targets on the same beam was by using his hangers made of AR500. I bought them with the new target and hung them both together (see before/after pics). Looks great and they work great together. (left side target not made by Brad-had to use chains). Brad is awesome to work with. Very personable business and he will quite please you with his craft!! I will continue to be a customer. Thanks Brad.
C
Everything that I have purchased from Atlas has far exceeded my expectations!
Atlas sent bolts to secure targets on hangers that I didn't use and no matter how hard I tried, couldn't knock the targets off the hangers, great design.
Fit and finish has been awesome! Hangers work much better and quicker than trying to hang targets from wire.
g
Brad at Atlas Targets always gives great products and services. Of the sesveral times I have bought targets and hangers hooks from them they have always been the best you can get and the best prices. Latest have been both the 6" and 12" target hanger hooks. Really like the new upgrade them made best you can find, not thin and weak, but strong and smooth. In my opinion you can not go wrong buying from Brad and Atlas Target Works
f
I made a plate rack with the leg brackets and J hooks, and 5 inch round targets. My local club features a plate rack at out matches.
j
So I replaced my old pipe hooks with Brads new design. I liked the old except had trouble with the small light targets. Either sticking in the upright position or just falling off. My only problem with this new design is using the bolt and lock nut. While using the bolt and lock nut should not be an issue for a semi permanent target stand placement. For me setting up and taking down target stands while people wait for me on the range is an issue. My solution was a 3/4 in. clevis and cotter pin. Set up and take down is much faster and easier. Beyond that, the new design works great and I no longer have issues with those small targets. Brad has always had great customer service, Lightning speed shipping and constant design innovation. Anything you buy from Atlas target works, you should be very! happy.
S
I was hanging my 16" AR500 ½” gong target with chains from a cross beam between 2 trees. Setup was working ok but had to replace one of the chains. It was a pain to redo the setup. I wanted a larger second target for iron sights so I contacted Brad (I've bought a few other targets from him) and told him about my set up. I sent him pics of what I had and he suggested the better way to hang both targets on the same beam was by using his hangers made of AR500. I bought them with the new target and hung them both together (see before/after pics). Looks great and they work great together. (left side target not made by Brad-had to use chains). Brad is awesome to work with. Very personable business and he will quite please you with his craft!! I will continue to be a customer. Thanks Brad.