Black Bear Target100% Scale
On a whitetail you learn to aim behind the shoulder crease. A bear does not give you that landmark. The heavy front shoulder and the way the leg hangs push the vital zone into a spot that looks closer to center mass than it should, and hunters who carry the deer habit over put the bullet forward into bone.
This target is dimensionally correct to a full-grown black bear. Not a scaled outline of one. It stands about 60" from snout to rump and 39-5/8" tall, with a 17-1/2" by 14-1/2" vital flapper cut and placed to the real anatomy.
Shoot it a few times and the flapper placement will look wrong to you. It is not. That is where the vitals sit on a live bear, and seeing it on steel at 200 yards is how the deer habit gets broken before a bear is standing in front of you.
Hit the vital and it will move and ring like a bell, hit the body and there will be a loud thwack! There is no walking downrange to find out which.
A sheet metal snout stencil comes in the box. Lay it over the muzzle when you repaint and the brown snout goes on in one pass. It is steel, not cardboard, so it lasts as long as the target does.
Specifications
- CNC laser-cut in the USA from American-made SR500+ steel
- 66" overall length, 39-5/8" tall, dimensionally correct to a full-grown black bear
- Reactive vital flapper, 17-1/2" x 14-1/2", anatomically placed
- Available in Full SR500+ or SR500+ Hybrid construction. On the Hybrid, the chest, shoulder, and vital zone are SR500+ and the head, haunch, and front legs are 14 gauge sheet metal. Everything worth aiming at is still SR500+. The sheet metal completes the silhouette and cuts the weight and the price.
- Reusable sheet metal snout stencil included
- Mounting hardware and stand not included. The mobile leg base is the recommended setup. Gong hanger kits also available.
- Target arrives unpainted
What target thickness do I need?
Target Selection and Use Guidelines
Short answer for a .308: 3/8" SR500+ at 100 yards or more. The same goes for .223, .30-06 and most other non-magnum rifles. Magnums like the .300 Win Mag call for 1/2".
These ratings are for SR500+. If you're comparing against AR500 targets elsewhere, SR500+ is harder (500-590 HBW against AR500's 470-530 spec), so it pits less at the same thickness. Here's the full SR500+ vs AR500 breakdown.
1/4" SR500+
Usage: Rimfire & Non-Magnum Handguns (.22LR, 9mm, .45 ACP etc)
Distance: 10+ yards
Energy Rating: Up to 500 ft-lbs at impact
Velocity Rating: Up to 3,000 fps at impact
Note: While this is rated for centerfire pistols, I recommend bumping up to 3/8" SR500+ if it's going to be for heavy centerfire pistol use.
3/8" SR500+
Usage: Handguns & Rifles (magnum pistols, .223, .308, .30-06 etc)
Distance: Handguns 10+ yards, Rifles 100+ yards
Energy Rating: Up to 3,000 ft-lbs at impact
Velocity Rating: Up to 3,200 fps at impact
Note: 3/8" SR500+ is the go-to target material for 95% of shooters and what I run on my personal range. If you're thinking that this material can't handle your rifle, remember that these ratings are at the point of impact and not at your muzzle. You just need to adjust your distance so the bullet loses enough energy to be bellow these thresholds.
1/2" SR500+
Usage: Magnum Rifles (.300 Win Mag, .338 Lapua etc)
Distance: 100+ yards
Energy Rating: Up to 4,000 ft-lbs at impact
Velocity Rating: Up to 3,200 fps at impact
Note: This is the go to target material for those of you who have magnum rifles and not enough range to get the target out there very far.