T-Post Hook Mount
$ 20.00$ 0.00
Orders under $99 = $12.50 Flat Rate Shipping
100313-375
- CNC laser-cut in the USA from American-made SR500+ steel
-
SR500+ steel is more durable and better suited for steel targets than AR500
- Barbed hook keeps your target secure without dampening its ring like chain, belt or springs
- Unlike many designs that have to sit at the top of the t-post, these fit anywhere so you can have multiple per t-post or simply have them at the height you want the target to be at
- Mount requires 1/2" square mounting holes found on all of our targets
Note: I'd recommend not using this mount for anything smaller than a 6" gong. Smaller gongs don't have much mass to absorb the energy of the bullet when it impacts. This causes much more of the energy to transfer to the hook which can cause it to bend and fail prematurely.
Don't waste your time saving a few bucks on far inferior mounts. These mounts easily slide over a t-post and when mounted behind a gong 6" or bigger expose nothing but the SR500+ steel hook.
B
Hi Brad, great design, easy to use. It held up to some serious use with 1/2 in. gong and silhouette targets. Really put hangers through the paces… AR at 300 yds and AXG Leigon at 25. Rang targets hard with no movement at all. My new setup has my Brother-in-law and Nephew paying attention. Thanks again
H
Solid and well made. Be sure to use the supplied bolt to lock it down.
b
my target is stuck because the hanger got bent in upon first use. know any good ways to get this thing off? i’ll give you 5 stars ⭐️ EDIT: The folks at Atlas Target were so helpful! They gave me a fantastic tip to free my target and even sent out a free replacement for the hook. Thank you Brad for going above and beyond! 🇺🇸 God bless
G
Works great. I use them for setting up Steel Challenge targets using t-posts in 1 1/4" PVC stands. Rather than use the supplied nut and bolt I use an inexpensive carabiner from Amazon. Speeds up sliding the mount up and down on the pole. These fit perfectly. https://www.amazon.com/dp/B08GFJCNZG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
G
My range isn’t exclusively Atlas Target steel but it is all exclusive to their target T-post hangers, targets swinger hooks and legs stands. When most ppl see my pistol and rifle range they assume I have at least $20,000 into it and I can asure all of you that’s not that case thanks to Atlas! Brads great prices have allowed me to have a better range than anything that it’s open to the public in South Dakota as well as rival Hickok 45’s range! Thanks Atlas Target Works!
B
Great quality product, shipped fast and easy to use!
J
I love the single hook option for big plates at range. Makes a great sound and with one hook, you'll get a more reactive swing on heavy steel.
Hung this big one at a mile and John was able to smack it 2x with his 6 Creed.
A
I ordered 6 of these and everyone fit the tposts perfectly. Love the design of these, very easy to setup, and I really like how easy it is to put them any any height I want. I even put two on a single tpost at different heights.
Well built, should last forever. Ordered 5 more.
S
Super simple to use and very robust. Full review below:
R
I use these mounts for my 22Lr target plates for evaluating my elevation and wind calls.
They work great for my 1/8 plates that range in size from 12x12, 16x16, and 20x20 that I use from 200-400 yards
because, the plates are free to move.
I can not only hear my impacts but, also see the movement of the plates for added confirmation.
The mounts are easy to install and very secure on the T-post.
Thanks for an awesome product!
J
Perfect size looks great came primed and easy to paint holds up well in the 308 and the hooks that I ordered with it are real easy to install. Shipping was in service was great. The the only great regret I have is I should have bought. the double bracket on a single pole.
J
I ordered a Squirrel shaped target and t post hook. The items shipped quickly and are great quality. I have already taken the target to my range and am enjoying the ping every time I hit the target
D
I made to the range one time with my t-post mount and it bent on the first trip. I had it set up at 300yds with a 6” gong shooting .308 bolt guns. I noticed after about 10 impacts, the target was angled to one side. After further inspection, I saw that the “hook” had bent from impacts. I noticed some impacts near the top, but would not have guessed the steel would bend from it.
You're absolutely right David, that shouldn't have happened. You're the first person to report something like this so I'll look into it and in the meantime I'll ship you a replacement from a fresh cut batch (with an added new feature!)
D
I’ll admit I’m lazy. I want to go out to my backyard range and not have to set up a bunch of wood mounts and all and I already had a tbar down there. So slide two pieces together quick hand fighting of a bolt and there my targets set up. Solid mount and no carpentry needed. Way to go Atlas targets. The raccoon target is held up by the mount.
M
I purchased 9 AR400 targets with the T Post mounts and the quality is off the charts, I also own steel From MGM and Challenge targets and Atlas quality is right there with them. Installation is very easy and straightforward, the adjustability is excellent as well. I will be making several more purchases from Atlas targets, the owner contacted me directly concerning a question I had and after my purchase I even received a gift certificate.
A
Awesome holder, use these in multiple targets out to 700 yards. Even holds my 4 inch gong at 600 well.
S
I now have 4 single and 1 double T-post mounts to go along with 5 targets from Brad. Even with all the shipping delays due to Covid19 Brad still got the latest shipment to me in 3 days!
A
Perfect! If you've got t-posts this one is a no-brainer. I easily put 2 hanging targets on the same post for some up-down instead of right-left target practice.
A
Ecellent cut quality and design
T
Simple and very effective. They work great!
A
Works great! The best part? I had a few questions and Brad was very helpful. This is the kind of business I’m happy to support. Great product and people!
J
Love the way the steel rings off this hanger. Was stupid simple to install so it took me a minute to get it going. Onlt complaint was that the hook wouldnt fit my targets and i had to dremel the holes a littlr bigger. The barb wouldnt clear. Other than that so far its a winner. Thanks.
A
I love these target hangers!. No more sagging issues when mounted to a t-post.
S
Noticed the comment about nothing smaller than a 6" target to keep the hook from bending. Does this still hold true if just using 22 rimfire?
No, .22lr doesn't have enough energy to bother it in the slightest.